 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN6104A N-Channel Silicon MOSFET 2SK3121 Ultrahigh-Speed Switching Applications Features * Low ON resistance. * Ultrahigh-speed switching. * 2.5V drive. Package Dimensions unit:mm 2062A [2SK3121] 4.5 1.6 1.5 0.4 3 1.5 2 3.0 0.75 0.5 1 1.0 4.25max 2.5 0.4 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Tc=25C Mounted on a ceramic board (250mm2x0.8mm) 1 : Gate 2 : Drain 3 : Source SANYO : PCP (Bottom view) Conditions Ratings 20 10 3 12 3.5 1.5 150 -55 to +150 Unit V V A A W W C C Electrical Characteristics at Ta = 25C Parameter Drain-to-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Symbol V(BR)DSS IDSS IGSS VGS(off) | yfs | RDS(on)1 RDS(on)2 ID=1mA, VGS=0 VDS=20V, VGS=0 VGS=8V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=1.5A ID=1.5A, VGS=4V ID=500mA, VGS=2.5V Conditions Ratings min 20 10 10 0.4 3.0 4.3 115 160 150 220 1.3 typ max Unit V A A V S m m Marking : KU Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 30100TS (KOTO) TA-2496 No.6104-1/4 2SK3121 Continued from preceding page. Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VSD IS=3A, VGS=0 VDS=10V, VGS=10V, ID=3A VDS=10V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit Conditions Ratings min typ 170 90 43 10 25 32 27 9.5 1 1.5 1.0 1.2 max Unit pF pF pF ns ns ns ns nC nC nC V Switching Time Test Circuit 4V 0V VIN VDD=10V ID=1.5A RL=6.7 D VOUT VIN PW=10s D.C.1% G 2SK3121 P.G 50 S 3.2 ID - VDS V 10.0 6 ID - VGS C Tc= 0.8 1.2 1.6 2.0 VDS=10V 5 Drain Current, ID - A Drain Current, ID - A 4 2.0 1.6 1.2 0.8 0.4 0 0 8.0V 6.0V 4.0V 3.0V 3 VGS=1.5V 2 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 0 0.4 75 C 2.4 2.8 2.4 -25 2.8 2. 25 5V 2.0V C 3.2 Drain-to-Source Voltage, VDS - V 300 Gate-to-Source Voltage, VGS - V Tc=25C Static Drain-to-Source On-State Resistance, RDS(on) - m 280 R DS(on) - VGS R DS(on) - Tc Static Drain-to-Source On-State Resistance, RDS(on) - m 250 240 ID=1.5A ID=0.5A 200 200 160 , 0.5A I D= .5 I D=1 =2.5 VGS V 150 =4V A,VGS 120 100 80 50 40 0 -60 0 0 1 2 3 4 5 6 7 8 9 10 -40 -20 0 20 40 60 80 100 120 140 160 Gate-to-Source Voltage, VGS - V Case Temperature, Tc - C No.6104-2/4 2SK3121 10 | yfs | - ID VDS=10V Tc =-2 5C Forward Transfer Admittance, | yfs | - S 7 5 3 2 25 C Forward Current, IF - A 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 I F - VSD VGS=0 75 C 1.0 7 5 3 2 75C 25C 0.2 0.4 0.6 0.1 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 0.001 0 T c=-2 0.8 5C 1.0 1.2 1.4 Drain Current, ID - A 1000 7 5 Diode Forward Voltage, VSD - V f=1MHz Gate-to-Source Voltage, VGS - V 10 9 8 7 6 5 4 3 2 1 Ciss,Coss,Crss - VDS VGS - Qg VDS=10V ID =3A Ciss, Coss, Crss - pF 3 2 Ciss 100 7 5 Coss Crss 3 2 10 0 2 4 6 8 10 12 14 16 18 20 0 0 1 2 3 4 5 6 7 8 9 10 Drain-to-Source Voltage,VDS - V 1000 7 5 Total Gate Charge, Qg - nC SW Time - I D VDD=10V VGS=4V Drain Current, ID - A ASO 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 IDP =12A ID=3A DC 100s 1m s 10 ms Switching Time, SW Time - ns 3 2 100 7 5 3 2 10 7 5 3 2 1.0 7 0.1 2 3 5 7 1.0 2 3 5 7 10 10 op era 0m s td(off) tf tr Operation in this area is limited by R DS (on). tio n td(on) 0.01 0.1 Tc=25C 1pulse 2 3 5 7 1.0 2 3 5 7 10 2 3 Drain Current, ID - A 1.6 Drain-to-Source Voltage,VDS - V 4.0 P D - Ta M Allowable Power Dissipation, PD - W P D - Tc Allowable Power Dissipation, PD - W 1.5 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 ou 3.5 3.0 nt ed on ac er am ic bo ar d (2 2.0 50 m m2 x0 .8 m m 1.0 ) 0 20 40 60 80 100 120 140 160 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta - C Case Temperature, Tc - C No.6104-3/4 2SK3121 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2000. Specifications and information herein are subject to change without notice. PS No.6104-4/4 |
Price & Availability of 2SK3121
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |